Leica-biosystems IPS Manuale Utente Scaricare il pdf (Pagina 37)

Leica IP S

4. Instrument Setup

Fig. 40

• Removetheinkcartridge(66) from the delivery

carton and shake it a few times, then remove

the protective foil.

• Theink cartridgemust bereplacedafter

60,000 printouts or 3.5 months. Record the

installation date on the white surface (65) on

the front (Fig. 39).

• Insertthecartridgeintotheslot.Loosenthe

red screw-on cap one full turn but do not

remove it yet.

• Insertthecartridgecompletelyintotherecep-

tacleapplyingmoderatepressure.Youhave

to use a certain amount of force to pierce the

seals.

• Withdrawthecartridge byabout1�inch

(30 mm) and push it back in as far as it will

go; repeat this step two or three times.

• Unscrewtheredcap(87)completelyfromthe

nozzle of the cartridge and store the screw-on

cap in the groove indented into the cartridge

for that purpose (Fig. 38, 39).

Exchanging the cartridge

(continued)

Fig. 37

Fig. 39

Fig. 38

Very important!

Prior to each transport, the cap (87)

must be screwed onto the nozzle to

prevent the ink from spilling.

This step is very important to ensure

safe operation of the printer!

• Directlynextto theslot openingisa safety

catch (86, Fig. 40). Moving this catch to the

side secures the ink cartridge against falling

out.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 69 70

Nessun commento

Leica-biosystems IPS Manuale Utente Pagina 37